Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across White City
Chimney repair in White City usually means something different than it does almost anywhere else in Florida. This is a small, unincorporated Treasure Coast community of single-story CBS and concrete-block ranch homes, most built from the 1970s into the 2000s, and the majority have no masonry fireplace at all. What they do have is appliance venting – metal flues on gas and electric equipment, dryer vents threading through carports and utility rooms – plus the occasional wood stove on a rural lot. When we say chimney repair here, we mean crown work, flashing work, liner work, and the sealed-over chases nobody has looked at in years. Call (844) 990-3838 and we’ll get a real look at what your home actually has.

Why White City Homeowners Call Unity Chimney Sweep for Chimney Repair
We work White City the way the town is actually laid out – spread along Midway Road, mixing older block homes with rural lots where wood stoves get real use, and we quote the job from what we find rather than from a script. Most White City homeowners who call us don’t think they have a chimney at all until someone explains that the metal flue behind their appliance is one. We start there.
We inspect before we sweep, and we repair what we find – one company through the whole job, so there’s no handoff between the person who inspects and the person who fixes. Our technicians have up to 11 years of experience, we install spec-grade components from recognized brands like HeatShield and DuraFlex rather than hardware-store substitutions, and we walk you through what we see on camera before anything is recommended. Response time to White City is quick: we answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Flashing Repair in White City
Chimney Flashing Repair in White City is mostly a water problem, not a fire problem. Subtropical heat and humidity mean chimneys here are rarely asked to handle heating loads, but hurricane-season wind-driven rain finds every gap, and flashing that’s lifted, rusted, or sealed with the wrong caulk lets water run straight into the chase and down onto metal liners. On CBS ranch homes the flashing sits where the vent penetrates the roof deck, often low on a shallow pitch, so a small failure spreads quickly. A typical flashing repair in White City runs $250 – $550, with the written estimate setting the final price after we’ve seen the roof.
What Flashing Repair Involves
We remove the failed sealant or damaged flashing, clean the deck back to sound material, and rebuild the seal with proper step and counter flashing rather than another bead of caulk over wet wood. The point is to shed wind-driven rain away from the penetration instead of trapping it.
Signs You Need It
Water stains on ceiling or wall near the vent, rust on a metal flue, or visible lifting at the roof line during a heavy rain. If you’ve recaulked it twice and it still leaks, the flashing is the problem, not the caulk.
Chimney Crown Repair in White City
Chimney Crown Repair in White City is usually about a crown cracking from the inside out. On a block home, the crown is the concrete or mortar cap at the top of the vent or chase, and months of sun followed by hurricane-season rain work on it from above and below. Once it cracks, water gets in, the crown spalls, and the damage climbs down into the flue. Typical crown repair in White City runs $350 – $900 depending on the size of the crown and how much rebuild is needed, with the final price set by the written estimate.
Repair Versus Rebuild
Hairline cracks can often be resurfaced and sealed. A crown that’s crumbled away from the flue, or is loose enough to move, needs to be rebuilt with a proper overhang so water drips clear of the masonry instead of running down the side.
Capping Tied to Crown Work
An uncapped flue takes rain straight down the pipe. When we’re already on the roof for crown work, we check the cap and cover – Gelco and Famco caps are what we install – because a good cap protects the crown and the liner at the same time.

Trusted Brands We Service in White City
The products on a chimney job are not a detail. We install DuraFlex for flexible stainless liners on appliance flues and wood stoves, HeatShield for resurfacing damaged flue interiors when the existing flue is sound enough to reline rather than replace, and Copperfield and Famco for chimney caps, covers, and weatherproofing components. Those brand names matter because they’re specified for the job, not chosen off a shelf. We don’t claim to stock parts locally in White City – we source what the job requires and install it to spec, which keeps the turnaround fast once the inspection has told us what’s actually wrong.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in White City Homes
- Heavy creosote on rural wood stoves. Wood stoves used as primary heat in White City load creosote far faster than the occasional decorative fireplace, and buildup often crosses past first-degree before anyone schedules a sweep. That’s when glazed, tar-like deposits form and the flue needs a rotary cleaning or a reline.
- Clogged and rusted appliance flues. Long, awkward dryer and furnace vent runs through attached carports and utility rooms on older block homes clog and rust out quietly. No fire was ever burned, so nobody thinks to check the vent until draft drops or a backdraft shows up.
- Sealed-over fireplace chases on Midway Road. On the older block homes along the White City stretch of Midway Road, remodelers often drywalled over the firebox and chase. The flue and smoke chamber are still there, uncapped and uninspected, and they still leak and still need capping.
- Uncapped flues taking rain. Hurricane-season wind-driven rain blows into uncapped flues, rusting metal liners and cracking crowns from the inside. It’s slow, quiet damage that nobody notices until it’s expensive.
Pricing for Chimney Repair in White City, FL
We price per job from a written estimate, and the estimate is free. For the work White City homes actually need, flashing repair typically runs $250 – $550 and crown repair $350 – $900. Liner work is the bigger item: a HeatShield resurfacing of a damaged flue generally falls in the $1,200 – $2,800 range, and a full DuraFlex stainless liner $2,500 – $5,500 depending on flue length and diameter. Sweeping and inspection are priced separately and quoted before we book. What moves the number is access to the roof, how much damage the water or creosote has already done, and whether the flue is relineable or needs replacement. Nothing gets recommended without camera evidence you can see for yourself, and we’ll tell you plainly when a repair can safely wait.
We Also Serve Cities Near White City
White City sits within reach of a lot of the Treasure Coast, and we work the neighboring communities too – Indian River Estates, Fort Pierce South, Fort Pierce, and Fort Pierce North. If your chimney repair needs are in any of those, our chimney repair team handles them with the same inspection-first approach. Call us and we’ll get you scheduled.
Serving White City, FL – Our Local Coverage Area
We serve White City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in White City
Yes – most White City CBS ranch homes have at least one appliance flue, metal B-vent, or direct-vent termination that functions as a chimney and needs inspection and capping. Those venting paths clog with bird and wasp nests, rust out, and take water exactly like a masonry chimney does. Call (844) 990-3838 for a free estimate and we’ll tell you what you actually have.
A wood stove used as primary heat in White City should be swept more often than a decorative fireplace – typically annually, and sooner if you’re burning wet wood or the stove runs most of the day. Heavy creosote loads fast when the stove is doing real work, so don’t wait for a smoky backdraft to schedule. Call us for an exact quote on the sweep.
Smoky backdraft in a White City home is usually a blocked or undersized flue, a rusted-out B-vent, a nest plugging the vent, or an appliance vent that’s lost its draft. When a stove is running hard and the smoke rolls back into the room, the flue needs a Level 2 inspection before another fire is lit. Call (844) 990-3838 – estimates are free.
It absolutely can. On older Midway Road block homes, remodelers often drywalled over the firebox while leaving the flue and smoke chamber in place, uncapped and uninspected – and that chase still takes wind-driven rain and can still leak. Capping and inspection are usually what’s needed; sometimes the whole flue just needs to be verified and sealed. Call us for a free estimate.
Third-degree creosote is glazed, tar-like buildup that’s baked onto the flue interior and can’t be brushed off – and it matters in White City because rural wood stoves load creosote much faster than occasional decorative fireplaces. Once it’s third-degree, the flue usually needs rotary cleaning or a HeatShield reline before it’s safe to burn again. Call (844) 990-3838 to schedule an inspection.
Whether your White City home has a wood stove running hard through the cool months or a sealed-over chase nobody has looked at since a remodel, we can tell you what it actually needs and what it will cost. Call (844) 990-3838 for a free estimate. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday.
Written by the team at Unity Chimney Sweep.