Chimney Repair in Port Salerno, FL | Unity Chimney Sweep

Chimney Repair in Port Salerno - Camera Evidence Before Any Quote

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Fast, Reliable Chimney Repair Across Port Salerno

If your fireplace is smoking back or the cap over your flue has rusted through, chimney repair in Port Salerno usually starts with a camera inspection inside the flue, and most diagnoses here come down to salt-air corrosion rather than heavy soot. We work on the older masonry stacks and the newer appliance venting that make up most of this village, and we tell you what your chimney actually needs before anything gets booked. Call (844) 990-3838. We answer 24/7.

Professional technician performing masonry repair on a residential brick chimney in Port Salerno, FL

Call (844) 990-3838

Why Port Salerno Homeowners Call Unity Chimney Sweep for Chimney Repair

Port Salerno sits right on the Indian River Lagoon, and that changes what a chimney needs. Salt spray in the air works on metal caps and chase parts harder than it does a few miles inland, so we spend a lot of our time here on moisture damage, rusted caps, and failed crown and flashing joints. Our technicians have up to 11 years of experience with exactly this kind of repair work, and our phones are answered at any hour.

We inspect before we sweep, and we repair what we find. That means a Level 2 camera inspection comes first, and any recommendation follows the pictures. If you’ve ever been told you need a whole new liner by someone who couldn’t show you why, that’s the gap we close. We handle the sweep, the inspection, and the repair as one continuous job with a single point of contact, not three separate visits with three different vendors. You get the evidence, you get the plain explanation, and you decide. Nothing gets added to an estimate without a photo of the problem behind it.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Cap Installation in Port Salerno

Chimney Cap Installation in Port Salerno often matters more for water and pest protection than for looks, because a lagoon-front cap takes a beating from salt air and driving rain. The job means fitting a cap sized to your flue opening and the type of flue you have – clay tile, a metal chase, or a relined stack – so it seals out rain and animals without choking the draft. If your flue has been open to the weather or you’ve heard birds in the stack, a proper cap is the first fix. We work with Gelco and Olympia Chimney caps and adapters, and a typical cap installation in Port Salerno runs $250 – $550 depending on the flue size, cap style, and how much the top of the stack has to be cleaned up first.

Getting the fit right on an older stack

Older Port Salerno flues aren’t always square or perfectly level at the crown, so a cap has to be sized and seated carefully or it rattles loose or leaks around the edge. We measure the flue and the crown rather than grabbing the nearest off-the-shelf size.

Screen and spark arrestor options

The screen keeps out birds, squirrels, and wind-blown debris, and the choice comes down to mesh size and how well it holds up to salt air. Stainless holds up better than painted steel near the lagoon.

Chimney Cap Replacement in Port Salerno

Chimney Cap Replacement in Port Salerno is usually a corrosion job, not a decorative one – metal caps here rust out years ahead of the same cap inland because the lagoon air keeps a salt film on them. Replacement means pulling the failed cap and its old adapter, checking the crown and the top courses of flue tile for water damage, then fitting a new cap that seals correctly. If the cap is flaking, rusted through at the seams, or sitting crooked, it’s time. Replacement with a stainless or heavy-gauge cap typically runs $300 – $650 in Port Salerno, and it’s worth doing before the next round of hurricane-season rain gets past a failed joint and down into the smoke chamber.

Signs your cap is past saving

Rust coming through the metal, a cap that tilts or shifts when the wind hits it, and water stains down the inside of the flue are the clear ones. A cap that’s still solid but slightly loose may only need reseating, which costs less.

What the replacement covers

We remove the old cap and adapter, check the crown and flue top for spalling or cracks, and seat the new cap so it seals out rain. If the crown has failed underneath, we’ll flag it and quote that separately.

Professional contractor performing chimney crown repair and masonry maintenance. in Port Salerno, FL

Trusted Brands We Service in Port Salerno

We work with a curated roster of professional-grade brands: DuraFlex for liner systems, HeatShield for flue resurfacing, Gelco and Olympia Chimney for caps and covers, and Famco where the spec calls for it. For Port Salerno homes with an older clay-tile or unlined stack, HeatShield and DuraFlex are the two that let us resurface or reline a flue rather than tell you the only option is a full rebuild. Those brands are the reason we can take a deteriorated flue from diagnosis to a finished, properly vented system without handing the hard part to somebody else.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Common Chimney Repair Problems We See in Port Salerno Homes

  • Clay-tile flues venting the wrong appliance. A gas insert or other appliance tied into an old stack that was never designed for it is common here, and it shows up as draft problems and a real carbon-monoxide risk. It’s an inspection problem first, and we check it with a camera before quoting a liner.
  • Salt corrosion on caps and chase parts. The lagoon air keeps caps and metal chase components wet with a salt film, so they rust ahead of the inland schedule. A cap that looks fine from the ground can be through at the seams when we get up close.
  • Failed crowns and flashing joints. Hurricane-season wind-driven rain gets into the crown and flashing every year, and water reaches the smoke chamber and firebox long before a homeowner notices. Moisture damage like this gets misread as a sweeping problem when the real fix is resealing.
  • Spalling mortar and joint gaps in older masonry. Mid-century CBS and cracker-style stacks in the older core of Port Salerno often have soft mortar joints and loose brick. Repointing and tuckpointing fix those before the brick itself starts to go.

Pricing for Chimney Repair in Port Salerno, FL

What a repair costs here follows the job, so we quote from the written estimate after we’ve seen inside the flue. Repointing and tuckpointing on a typical stack runs $400 – $1,200, chimney waterproofing for salt-exposed masonry runs $350 – $800, flashing repair runs $300 – $750, and a HeatShield flue resurfacing runs $1,200 – $2,800 depending on flue length and condition. Cap work sits in the ranges above. What moves the price is the condition of the crown, whether the flue needs relining, and how accessible the roof is. The estimate is free, the numbers are ours and not a range we’ll revise on arrival, and anything that can safely wait a season, we’ll tell you it can wait.

We Also Serve Cities Near Port Salerno

We take the same repair and inspection work to homeowners in Stuart, North River Shores, Palm City, and Hobe Sound, and the salt-air corrosion that drives repairs in Port Salerno is just as real up and down the lagoon. If you’re nearby and your cap is failing or your stack is smoking back, call us. Read more about Port Salerno and our Chimney Repair.

Serving Port Salerno, FL – Our Local Coverage Area

We serve Port Salerno and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Repair in Port Salerno

Why Port Salerno Chooses Unity Chimney Sweep

We set the standard for chimney repair in Port Salerno.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Port Salerno

Getting your chimney repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your chimney repair needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

We Book a Time That Works for You

A background-checked, certified technician arrives at the time we agree on.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Port Salerno Customers Say

Trusted by homeowners across Port Salerno and surrounding areas.

★★★★★

"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."

Laura Hayes
★★★★★

"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."

Renee Novak
★★★★★

"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."

Shannon Ackerman

Ready for Chimney Repair in Port Salerno?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast help in Port Salerno.

(844) 990-3838

Request a Free Estimate in Port Salerno

Tell us about your chimney repair needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - We Answer 24/7