Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Port St. Lucie Homeowners
Most chimney problems in Port St. Lucie announce themselves quietly: a stain on the ceiling that shows up weeks after a rain, a draft that wasn’t there last winter, or creosote building up in a flue you thought was clean. A proper inspection finds those problems while they’re still small. Our technicians have up to 11 years of experience, we inspect before we sweep, and we repair what we find under the same roof – no handoffs, no second appointment with a stranger. Estimates are free, and a level 2 inspection with camera photos can usually be booked the same day. Call (844) 990-3838. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Fireplace Inspection
Fireplace Inspection is the close look at the firebox, damper, smoke chamber, and the first few feet of flue that catch most of what goes wrong with a wood-burning fireplace. You need one when the fireplace smokes back into the room, when the damper won’t seal, or when you’ve moved into a Port St. Lucie home and don’t know the last time anyone looked. Unity Chimney Sweep examines the firebox for cracked brick and open mortar joints, checks the damper for a tight seal, and reads the smoke chamber for the turbulence that pushes smoke into a living room. We bring a flashlight and small mirror to every visit, and a camera when the firebox hides something. A fireplace inspection typically runs $125-$250, and the written estimate sets the final price.
What the Firebox Reveals
Hairline cracks in firebox brick look harmless and often are, but cracks wide enough to catch a fingernail let heat reach the surrounding framing. We map those joints and tell you which ones matter now and which can wait.
Damper and Smoke Chamber Checks
A damper that doesn’t close leaves a straight path for humid Florida air and the insects that follow it. We test the seal by hand and by eye, then look up into the smoke chamber for the rounded-off parging that quiets a smoky fireplace.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Inspection Services
Chimney Inspection Services cover the whole assembly, from the crown at the top of the stack down to the appliance connection at the bottom, and they’re what you book before a season of burning or after any event that shook the chimney. You need one when you buy a home, after a lightning strike or a storm, when you switch fuels, or when it’s simply been a few years. Unity Chimney Sweep follows the three-level framework the trade uses: level 1 for an annual visual check of an accessible chimney, level 2 when something has changed or a camera is needed, level 3 when a hidden defect has to be opened up. Pricing starts at $125-$250 for a level 1 and runs $250-$450 for a level 2. Every inspection is documented with photos you keep.
Annual Versus Event-Driven
An annual level 1 suits a chimney with no changes since the last visit. Anything that shifts the picture – a new liner, a new appliance, a sale, a storm – calls for the deeper look.

What the Report Includes
You get photos of each defect with a plain-English note on severity, plus a written summary of what needs attention and what can wait. Nothing is recommended without evidence you can see for yourself.

Chimney Flue Inspection
Chimney Flue Inspection is the focused look inside the flue itself, the vertical passage that carries smoke and carbon monoxide out of the house. It matters most when the flue serves a wood stove or insert, when the liner material is unknown, or when a previous sweep mentioned glazed creosote. Unity Chimney Sweep checks the flue for cracks, gaps at the joints, missing mortar, heavy creosote, and obstructions like bird nests and leaf debris – all common in Port St. Lucie where a chimney sits idle through the long humid months and critters move in. The flue reading tells us whether the liner is sound or whether a HeatShield resurfacing or DuraFlex reline is the honest answer. Flue-focused inspections generally fall in the $150-$300 range, with the written estimate setting the final figure.
Reading the Liner
Clay tile liners crack at the joints; metal liners fail at the seams and the top connection. We check both with a camera and note exactly where the weak point sits.
Creosote Stages and What They Mean
Creosote moves from a light soot to a crusty flake to a glazed tar that ignites at lower temperatures. Glazed creosote can’t be brushed off with a standard sweep, and we say so plainly rather than brush it twice and call it done.
Chimney Fire
Chimney Fire is the ignition of creosote or debris inside the flue, and a slow one can burn for a while without anyone noticing flames – homeowners often describe a low roar, a vibration, or black smoke at the cap. You need an inspection after any suspected chimney fire, even a small one, and before the next burn if you’ve never had the flue checked. Unity Chimney Sweep inspects the liner for heat damage and cracking, checks the chimney’s exterior for warped or discolored metal, and looks at the framing contact points for charring a fire can leave behind. A post-fire inspection with camera typically runs $250-$450, and if the liner is compromised we handle the repair with a HeatShield or DuraFlex product rather than sending you elsewhere. Call (844) 990-3838 – a suspected fire is not something to wait on.
The Quiet Burn
Not every chimney fire makes a sound. A hissing or popping from the flue, or smoke backing into the room, is enough reason to stop using the fireplace and get it looked at.
Damage That Hides
Heat damage often shows as a fine crack network in the liner rather than a visible gap. A camera catches what a flashlight misses, and we show you the photo.
Level 2 Chimney Inspection
Level 2 Chimney Inspection is the camera-based inspection required whenever a property changes hands, an appliance changes, or the condition of the flue is unknown – it goes beyond the accessible visual check to cover the entire flue with a video scan. It’s the standard you want for a Port St. Lucie home purchase, after a chimney fire, after an earthquake or severe storm, or when you’ve switched to a new stove or insert. Unity Chimney Sweep runs a camera the length of the flue, checks all accessible interior joints and the attic and roof-level connections, and documents what the camera sees with photos. A level 2 inspection typically costs $250-$450 in Port St. Lucie depending on flue length and access. It’s the most useful inspection for a home you’re buying or a chimney you’ve never had checked.
When the Camera Is Required
The trade-standard rule is straightforward: any change in ownership, fuel, or appliance means a level 2. So does any event that could have damaged the flue.
What a Level 2 Covers
The full flue by camera, the firebox and smoke chamber, the damper, the crown and cap, and the connections where the chimney meets the house. We note each finding with a photo.
Chimney Leak
Chimney Leak is water getting into the chimney structure or the house around it, and in Port St. Lucie the culprit is almost always a rainy season downpour hitting an aging crown, a cracked cap, or missing flashing at the roof line. You need an inspection when you see a ceiling stain, rust on the firebox or damper, or water in the firebox after a storm. Unity Chimney Sweep traces the leak to its source rather than guessing: we check the crown for cracks and shrinkage, the cap and its screen, the flashing where the roof meets the masonry, and the mortar joints for the openings that let water wick in. If the crown is the problem, a Gelco or Olympia Chimney crown product gives you a proper repair rather than a smear of caulk. Leak inspections generally run $150-$300, and the written estimate sets the final price.
Crown, Cap, and Flashing
The crown sheds water off the top of the stack, the cap keeps rain out of the flue, and the flashing seals the roof joint. A leak can come from any of the three, and the fix differs for each.
Rust and Stains as Clues
Rust on a damper or a water stain at the firebox tells us water is reaching the chimney interior, not just the roof. That changes what we look at and how soon it should be addressed.
Chimney Camera Inspection
Chimney Camera Inspection is the video scan that runs a lighted camera down the full length of the flue so you can see what’s happening inside the chimney on a screen. You need it whenever the flue condition is unknown, after a fire or storm, before buying a home, or when a prior sweep flagged something worth a second look. Unity Chimney Sweep uses a color camera that shows cracks, gaps, creosote glaze, and obstructions as they actually look, and we hand you the photos with our notes. You see what the camera sees – no one has to take our word that the liner is failing. Camera inspections typically cost $250-$450 in Port St. Lucie, depending on flue length and access, and the written estimate is the final price. It’s the closest thing to looking inside your own chimney.
What You’ll See on the Screen
Cracks at the tile joints, missing mortar between sections, a liner seam that has opened, or a nest wedged tight. Each finding gets a photo so you can review it later.
The Photo Report You Keep
The report is yours to keep and useful at resale or for a second opinion. We’d rather you have the evidence in hand than just our summary of it.
Brands We Service
We work with DuraFlex, a stainless steel liner system used to reline a chimney whose flue has failed, and we know the wear points at the top plate and the appliance connection. We also work with HeatShield, the resurfacing product used to restore a damaged clay flue without a full reline – familiarity that matters when the honest fix is repair, not replacement.
For caps, crowns, and weatherproofing, we work with Gelco and Olympia Chimney, and we know where their products go and where they don’t. Whether your chimney has DuraFlex, HeatShield, Gelco, Olympia Chimney, or any other make, we can help, and we’ll tell you what it actually needs rather than what’s easiest to sell.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Smoke backing into the room. A fireplace that smokes once when the flue is cold is normal. Smoke on every burn usually points to a blocked flue, a failing smoke chamber, or a negative pressure problem we can trace.
- A water stain on the ceiling or wall near the chimney. Water is finding a path through the crown, cap, or flashing, and it will keep going until the source is fixed. Left alone, moisture in the masonry weakens the joints.
- Rust on the damper or in the firebox. Rust inside a firebox means water is reaching the flue and the metal parts, not just the roof outside. It’s an inspection trigger even when there’s no stain.
- A roaring or popping sound during a fire. Those sounds can mean creosote is igniting in the flue. Stop burning, and call for an inspection before you light another fire.
- Visible cracks in the firebox or liner. Cracks in the firebox can let heat reach the framing, and a cracked liner can let carbon monoxide into the house. Both need eyes on them.
Our Process, Step by Step
- 1
Start with a conversation. We ask what you burn, how often, and what you’ve noticed – smoke, smell, stains, drafts. That history tells us where to look first and whether a level 1 or level 2 is right for your chimney in Port St. Lucie.
- 2
Inspect before we sweep. We inspect the firebox, damper, smoke chamber, flue, crown, cap, and flashing before touching a brush. Sweeping first can hide a defect we need to see.
- 3
Run the camera where it counts. We use a color camera down the full flue so we can see what the eye can’t. You watch the screen with us, or we hand over the photos afterward.
- 4
Explain what we found. We walk you through each finding with a photo and a plain-English note on severity. If something can safely wait, we tell you that too.
- 5
Put it in writing. The estimate lists exactly what needs doing and what it costs, and nothing is done without your approval. Single-company accountability from inspection through final repair.
How Much Does Chimney Inspection Cost in Port St. Lucie?
A typical level 1 chimney inspection in Port St. Lucie runs $125-$250, depending on access to the roof and the number of appliances connected. A level 2 with a camera scan typically runs $250-$450, and few things in a house are as cheap to get right as a professional look inside the flue. Flue-focused inspections sit in the $150-$300 range, and leak inspections generally run $150-$300 as well.
What affects the price: flue length, whether a wood stove or insert is connected, roof pitch and access, the number of appliances sharing the chimney, and whether a camera run is needed. If a chimney is hard to reach from the roof, we may inspect from the bottom and adjust the estimate – and we tell you before we start.
How to avoid overpaying: ask for photos with the report, ask whether the quote is a level 1 or level 2, and ask what can safely wait. We tell you what your chimney actually needs – not what adds the most to an invoice. The free estimate includes a walkthrough, the camera findings, and a written summary. Call (844) 990-3838 for an exact quote – estimates are free.
Our Service Area Near Port St. Lucie
We serve Port St. Lucie and the neighborhoods and towns around it, including River Park, White City, Indian River Estates, North River Shores, Jensen Beach, Palm City, Fort Pierce, and Stuart. Scheduling is quickest near our core areas. Read more about our Port St. Lucie service area, or start with an inspection and we’ll route you from there. Fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Port St. Lucie, FL – Our Local Coverage Area
We serve Port St. Lucie and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Inspection in Port St. Lucie
A chimney inspection is a professional examination of the chimney’s condition – firebox, damper, smoke chamber, flue, crown, cap, and flashing – to find defects, blockages, and wear before they become dangerous. It’s the diagnostic step before any sweep or repair, and it’s what tells you whether your chimney is safe to use. At Unity Chimney Sweep, our technicians have up to 11 years of experience and inspect before we sweep. Call (844) 990-3838 for an exact quote.
A level 1 inspection usually takes 30-45 minutes, and a level 2 with a camera scan typically takes 60-90 minutes depending on access and flue length. Complex setups with multiple appliances or difficult roof access run longer, and we tell you ahead of time. Call (844) 990-3838 for an exact quote – estimates are free.
A level 1 chimney inspection in Port St. Lucie typically runs $125-$250, and a level 2 with a camera scan runs $250-$450. Flue and leak inspections generally fall in the $150-$300 range. The written estimate sets the final price. Call (844) 990-3838 for an exact quote – estimates are free.
Yes. We source and install DuraFlex liner systems and we service existing DuraFlex installations, checking the top plate, the seams, and the appliance connection where they wear. HeatShield, Gelco, and Olympia Chimney products are also available for resurfacing, caps, and crowns. Call (844) 990-3838 for an exact quote – estimates are free.
Same-day service is often available on inspections – call and we’ll book the next opening. Fast dispatch runs from 7am to 7pm, Sunday through Friday, and we’re closed on Saturday. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Yes. Our inspection is documented with photos and a written summary, and we stand behind the findings we report. If the camera shows a defect, we show you the photo and explain what it means. Call (844) 990-3838 for an exact quote – estimates are free.
Clear the hearth and the floor in front of the fireplace, remove any screen, insert doors, or glass front that could get in the way, and note any smoke or stain problems you’ve seen so we can look at the right places. Keep the flue clear of a fire for at least 24 hours before the visit, and secure pets. That’s all we need to do the job.
Schedule Your Chimney Inspection Service in Port St. Lucie Today
Book a chimney inspection in Port St. Lucie and find out what’s actually going on in your flue – one company, every part of the chimney, from inspection through repair. Our technicians have up to 11 years of experience, and every visit comes with a written estimate and a no-obligation quote. Call (844) 990-3838. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Unity Chimney Sweep.