Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Jensen Beach
If water is staining a ceiling near the chimney, your damper won’t move, or the stucco around the crown looks cracked, you’re likely dealing with the kind of moisture damage we see all over Jensen Beach. This is a salt-air town where chimneys fail from rust and rain long before they fail from heavy burning. Our technicians have up to 11 years of experience and we handle the whole chimney – inspection, sweeping, and structural repair – so you’re not passed from one trade to another. Call (844) 990-3838. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Why Jensen Beach Homeowners Call Unity Chimney Sweep for Chimney Repair
Repair work around here is diagnostic work, and that’s where we start: we inspect before we sweep, and we repair only what the camera actually shows. Jensen Beach’s older homes have a way of hiding problems behind decorative stucco and block construction, so guesswork is expensive and unfair to you.
We build trust with evidence on a screen, not sales pressure. A corroded damper, a cracked flue tile, a moisture-stained crown – you see it for yourself before anything is recommended. That’s the whole difference between honest repair and a blanket upsell.
We work in Jensen Beach regularly and know the housing stock on the near side of the Indian River Lagoon, from the mid-century concrete-block ranches to the stucco homes built through the 1980s and 2000s. We also work with a curated roster of professional-grade brands – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – so the materials match the job, not the shelf.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Repair Companies in Jensen Beach
Chimney Repair Companies in Jensen Beach are doing a different job than their counterparts inland, because the subtropical marine climate, salt air off the Indian River Lagoon, and heavy summer rain drive most of the failures here. Small structural repairs – flashing, crowns, caps, dampers – are the bread and butter of this work.
A Jensen Beach homeowner usually needs this kind of repair after a tropical storm pushes wind-driven rain past a poorly sealed crown, after rust seizes a damper, or after a technician finds open gaps in a flue the seller never mentioned. Typical small repairs run $250 – $650, and a full rebuild can reach $3,000 – $8,000. The written estimate sets the final price.
Small Structural Repairs
Flashing, caps, crowns, and dampers are the fastest fix and the most common call in Jensen Beach. These are the parts the salt air and rain attack first, and catching them early keeps water out of the flue.
Diagnosing Before Quoting
We run a camera through the flue and show you the footage before quoting any repair. If the flue is sound, we say so. When the camera shows cracked tile or an open joint, that’s what drives the recommendation.
Chimney Masonry Repair in Jensen Beach
Chimney Masonry Repair in Jensen Beach often means addressing mortar and brick that years of humidity and salt have worn down, along with stucco which cracks and traps moisture around the cap. The two big masonry jobs here are repointing and resurfacing.
When a Jensen Beach homeowner needs it: the mortar joints have gone soft and sandy between the bricks, or the interior clay tiles show eroded joints that open the way for heat and gases. Tuckpointing runs $15 – $25 per square foot of brick face, repointing $600 – $2,500 for a typical chimney, and spalling brick repair or rebuilding a coursed masonry chimney reaches $3,000 – $8,000. The written estimate sets the final price, and nothing is recommended until you’ve seen the evidence.
Repointing and Tuckpointing
Repointing cuts out the soft mortar and replaces it with a mix matched to the original brick, so the wall can still breathe. Tuckpointing finishes the job with a neat line that hides the repair. Both are worth doing before the water gets in behind the brick.

Resurfacing the Flue
HeatShield resurfacing repairs a lined flue from the inside without knocking the chimney apart. For an unlined or eroded clay-tile flue, it’s the repair that keeps the original structure while restoring a smooth, sealed surface.
Trusted Brands We Service in Jensen Beach
We source and install products from DuraFlex, HeatShield, Gelco, and Olympia Chimney, so the caps, dampers, liners, and flue resurfacers we fit are spec-grade materials from brands chimney professionals already know. We don’t claim to stock these parts locally or run a warehouse. The value is that we know how they go together and can specify the right one for your chimney, then get it in and fitted without a long stall. When a Jensen Beach crown or cap needs replacing, we pick the component that suits the construction, not the nearest hardware-store substitute. Fast turnaround matters here, because moisture won’t wait.
Common Chimney Repair Problems We See in Jensen Beach Homes
- Cracked stucco crowns and caps. Hurricane-season wind-driven rain forces water past cracked stucco, and it tracks down the flue to the damper. Once the crown opens up, every rainstorm adds to the damage.
- Eroded clay flues and hidden gaps. Original clay-tile flues in the 1950s – 1970s ranches have joints worn by salt air, and only a camera finds the voids you’d never see from below.
- Rusted or seized firebox dampers. The marine humidity freezes dampers open or shut even in a rarely used fireplace, and a damper that won’t close lets the cool air escape year-round.
- Wildlife in the flue during the off-season. Chimney swifts, raccoons, and bats nest in Jensen Beach flues while the fireplace sits idle, which blocks draft and leaves debris a simple sweep won’t clear.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Jensen Beach, FL
Repair costs here track the size of the job and the access, not the neighborhood. Typical repairs run $250 – $650 for flashings, caps, and dampers, $600 – $2,500 for repointing, and $3,000 – $8,000 for a full rebuild or spalling brick repair. Tuckpointing is priced by the square foot at $15 – $25. Because Jensen Beach chimneys fail from moisture and rust more than from heavy burning, a lot of the money goes to sealing and steel rather than masonry, which usually lands at the lower end of those ranges. The written estimate sets the price, and the estimate is free.
We Also Serve Cities Near Jensen Beach
We work throughout the Treasure Coast and handle chimney repair for homeowners in Jensen Beach, North River Shores, Stuart, Palm City, and Port Salerno. The same salt air, humidity, and summer storms that wear on Jensen Beach chimneys affect these neighboring towns the same way. If you’re just outside town, call and we’ll confirm your address. You can also read about our full chimney repair services and what a visit covers.
Serving Jensen Beach, FL – Our Local Coverage Area
We serve Jensen Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Jensen Beach
Salt air off the Indian River Lagoon corrodes dampers, caps, and steel components faster than in drier inland cities, so repair here is as much about rust and moisture remediation as masonry. We recommend inspecting for corrosion every year, not just when something looks wrong. Call (844) 990-3838 for a free estimate.
Stay away from the fireplace and call a trained professional rather than trying to clear the flue yourself. Wildlife inside a flue blocks draft and can leave a fire hazard behind, and the obstruction has to be removed safely, often by camera inspection and then sweeping. Call (844) 990-3838 for a free estimate.
Yes. Stucco surrounds are common on Jensen Beach homes and they crack with the humidity and wind-driven rain, so the repair usually involves resealing the stucco, then repairing the crown and flashing underneath. We show you the crack and the moisture trail on camera before quoting. Call (844) 990-3838 for a free estimate.
The rust comes from humidity and salt air, not your fire. Even an unused fireplace draws moist marine air up the flue, and a rusted or seized damper can let cold air escape year-round, so it’s worth checking even if the hearth stays cold most of the year. Call (844) 990-3838 for a free estimate.
Once a year is the right interval here, even if you burn only during the brief cool snaps in January and February. Salt air and summer storms cause damage whether or not the fireplace is in use, and a camera inspection catches it early. Call (844) 990-3838 for a free estimate.
Book Your Chimney Repair in Jensen Beach
If something about your chimney looks off, or you’d just like a straight answer before the next storm, call Unity Chimney Sweep today. Our technicians have up to 11 years of experience, we inspect before we sweep, and we repair what we find – nothing more. You’ll see the camera evidence yourself, and no repair is recommended until you do. Call (844) 990-3838 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Unity Chimney Sweep.