Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Hobe Sound
If you’re searching for chimney repair in Hobe Sound because of a musty smell, a rusted damper, or a cap that didn’t survive last hurricane season, you’re in the right place. We handle the full range of masonry and flue repairs for Hobe Sound homeowners, from mortar repointing and tuckpointing to flashing repair, waterproofing, and full chimney rebuilding. We know this stretch of Martin County, from the estate homes near Jupiter Island to the older cottages around the original village, and we plan the drive accordingly. Call (844) 990-3838 to book a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Hobe Sound Homeowners Call Unity Chimney Sweep for Chimney Repair
Hobe Sound is a low-density, estate-heavy community, and that shapes what chimney work looks like here more than anything else. Most of the fireplaces in town are decorative wood-burning or gas inserts in custom homes built from the 1970s through the 2000s, and many sit sealed and unused for eight or nine months at a stretch. So our repair calls in Hobe Sound are rarely about heavy creosote. They’re about salt-air crown cracking, rusted dampers, and animals that moved into a quiet flue.
Our technicians have up to 11 years of experience, and we run a diagnostic-first workflow: we inspect before we sweep and repair only what the inspection actually finds. We’re straight with Hobe Sound homeowners about that. Nothing gets recommended without evidence you can see for yourself, and we’ll tell you plainly when a repair can safely wait until next season. That’s part of why we’ve built a strong local reputation across the Hobe Sound area and why customers in gated communities along Jupiter Island and in the older village homes alike keep calling us back. One company handles the inspection, the sweep, and the repair, so there’s no handoff to a stranger halfway through the job.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Liner Installation in Hobe Sound
Chimney liner installation in Hobe Sound usually comes up after an inspection turns up a cracked flue tile, a rusted damper, or a flue that’s been colonized by animals during the long off-season. When a masonry flue has spalled from moisture or lost its protective tile, a stainless liner restores a safe path for smoke and protects the chimney structure. We install DuraFlex liners for exactly this kind of structural and draft problem, and we can resurface a damaged flue with HeatShield when relining isn’t the right answer. A typical liner installation in Hobe Sound runs $2,400 – $4,800, depending on flue height, liner diameter, and whether the crown and cap need work at the same time.
When a Liner Makes Sense
If your Hobe Sound flue has cracked tiles, gaps at the joints, or heavy rust on the damper from months of humid, sealed-off air, relining is usually the durable fix. A liner also keeps birds, bats, and raccoons from finding a way back in during the off-season. We only recommend one when the inspection shows the evidence.
Liner Materials and Fit
We work with DuraFlex and Olympia Chimney for stainless liner systems, matching the material to what your fireplace actually burns. Fit matters as much as the material: a liner that’s too wide won’t seat, and one that’s too narrow can restrict draft. The written estimate sets the final price after we’ve measured.
Chimney Flashing Repair in Hobe Sound
Chimney flashing repair in Hobe Sound is driven almost entirely by hurricane-season wind-driven rain and the salt air that rides with it. Flashing is the metal that seals the joint where your chimney meets the roof. When it lifts, cracks, or rusts through, water gets in at the worst possible angle, and in this climate that shows up fast as a ceiling stain or a musty smell. A typical flashing repair in Hobe Sound runs $350 – $850, depending on roof pitch, whether the existing flashing can be resealed or needs full replacement, and how much rotted step flashing needs to come out. We inspect before we quote and show you the failure points we find.
Signs Your Flashing Has Failed
Look for water stains on the ceiling near the chimney, rust streaks on the metal, or separated caulk lines at the roof joint. On exterior masonry chimneys exposed to salt air, flashing often fails before the mortar does. A Level 2 inspection catches it before it becomes interior water damage.
Resealing vs. Replacing
If the metal is sound and the seal has simply broken down, resealing handles it. If the flashing has rusted through or pulled away from the masonry, replacement is the honest answer. We’ll tell you which one your chimney actually needs.

Trusted Brands We Service in Hobe Sound
The products we install matter as much as the labor. We source and install from a curated roster of professional-grade brands: DuraFlex for stainless liners, HeatShield for flue resurfacing, Gelco and Famco for chimney caps and covers, and Olympia Chimney and Copperfield for the rest of the system. We don’t stock parts locally. What that means for Hobe Sound homeowners is simple: the right component gets ordered for your chimney rather than whatever’s closest to hand, and we keep the turnaround tight. We’re not claiming an exclusive partnership with any of these brands. We’re saying we know them well enough to spec the correct part the first time.
Common Chimney Repair Problems We See in Hobe Sound Homes
- Cracked chimney crowns from salt air and storm rain. The crown is the concrete cap at the top, and in Hobe Sound it takes the full force of onshore wind and salt-laden rain for eight or nine months a year. Once it cracks, water runs down into the flue and starts degrading the masonry.
- Rusted dampers and firebox parts. A sealed, unused chimney in this subtropical humidity traps moisture. Dampers rust shut, and firebox components corrode long before the fireplace is ever used.
- Animal intrusion in dormant flues. Raccoons, birds, and bats treat a quiet chimney as a home. Mud-dauber colonies and leaf debris block the flue, and that becomes a fire hazard the first cool evening you light a fire.
- Spalling brick on exterior chimneys. Salt air and driven rain work on the brick face until it flakes and pops. Repointing and tuckpointing catch it early; rebuilding handles the worst cases.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Hobe Sound, FL
Hobe Sound’s estate-heavy housing stock and the long drive out to low-density properties both influence what repair work costs here, so it’s worth naming real numbers rather than a vague “it varies.” A typical mortar repointing or tuckpointing job runs $600 – $1,800, depending on how much surface area needs attention. Chimney waterproofing runs $350 – $700. Crown sealing or rebuilding runs $450 – $1,200. Chimney flashing repair runs $350 – $850. A stainless liner installation runs $2,400 – $4,800. Chimney rebuilding, when the structure itself has failed, runs higher and gets its own written scope. Those are estimates, not quotes. The written estimate you get before booking sets the final price, and the estimate itself is free. Call (844) 990-3838 for an exact quote.
We Also Serve Cities Near Hobe Sound
Our service area reaches beyond Hobe Sound into the surrounding Martin County communities. If you’re in Port Salerno, Stuart, Palm City, or North River Shores, we can schedule an inspection or repair visit in your area too. The same diagnostic-first workflow applies wherever you are. Call (844) 990-3838 and we’ll confirm coverage and timing for your address. Our chimney repair team handles the full range of masonry, flashing, and liner work across the region.
Serving Hobe Sound, FL – Our Local Coverage Area
We serve Hobe Sound and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Hobe Sound
Disuse is exactly the reason most Hobe Sound chimneys need repair. A chimney sealed for eight or nine months traps humid air, which rusts dampers and firebox parts, and a dormant flue is prime real estate for raccoons, birds, and mud-daubers. Add salt-laden air and hurricane-driven rain working on the crown and flashing, and the damage happens whether or not you light a fire. Call (844) 990-3838 for a free estimate.
Once a year is the right interval for Hobe Sound, even if you only burn a handful of evenings a year. An annual Level 2 inspection catches crown cracks, flashing failures, and animal intrusion before they become structural repairs. The long off-season is when most of the damage accumulates, so inspecting before the first cool evening makes the most sense. Call (844) 990-3838 to book yours.
Most Hobe Sound chimneys carry light, flaky creosote rather than the heavy glaze you’d see in a home that burns wood as primary heat. That’s because the fireplaces here are decorative wood-burning or gas inserts used a few cool evenings a year. Light creosote still needs sweeping, and any blocking debris from animals needs to come out before the first fire. Call (844) 990-3838 for a free estimate.
Yes, a cracked crown is one of the most common causes of chimney leaks in Hobe Sound, and it’s directly tied to salt air and wind-driven storm rain. The crown sheds water away from the flue; when it cracks, water runs straight down into the masonry and shows up as ceiling stains or a musty smell inside. Crown sealing or rebuilding typically runs $450 – $1,200. Call (844) 990-3838 for a free estimate.
We install DuraFlex stainless liners and can resurface a damaged flue with HeatShield, and we also work with Olympia Chimney liner systems. The right choice depends on flue condition, size, and what your fireplace burns, which is why we inspect first. Liner installation in Hobe Sound typically runs $2,400 – $4,800. Call (844) 990-3838 for a free estimate.
Book Your Chimney Repair in Hobe Sound
Whether your chimney needs flashing repair, a new liner, crown work, or a full repointing job, we’ll inspect first and tell you what it actually needs. Nothing gets recommended without evidence you can see. The estimate is free, and the written estimate sets the final price. Call (844) 990-3838 today. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Unity Chimney Sweep.