Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Florida Ridge
If you’re in the 32962 area and water is coming in around your chimney, we can help. Unity Chimney Sweep handles chimney repair across Florida Ridge, from storm-stripped caps and cracked crowns to flashing failures that show up as a brown ring on the ceiling. We know what these homes look like from the roofline down: single-story concrete block and stucco ranches with a decorative chase routed through the attic rather than a full exterior stack. That changes what a repair call actually is here. Our technicians have up to 11 years of experience reading those signs. Call (844) 990-3838. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Why Florida Ridge Homeowners Call Unity Chimney Sweep for Chimney Repair
Our reputation in Florida Ridge comes from telling people the truth about a chimney they rarely use. Most calls we get from this community start with a question: is that stain on my ceiling the chimney, or something else? We don’t guess. We inspect first, show you what the camera sees, and repair only what the evidence supports. If a crack can safely wait until after the rainy season, we’ll say so.
Homeowners in Florida Ridge call us because they’ve heard scratching in the attic or watched a stain spread after a windy summer storm and want one company to handle the whole job: inspection, the repair itself, and the final walkthrough. No handoffs, no second appointment with a stranger. We handle sweeping, inspection, and structural repair as one continuous process, and we work with spec-grade materials from brands like Copperfield and HeatShield rather than generic hardware-store parts. That matters when the fix has to hold up to Treasure Coast wind and rain, not just look sealed on the day it’s installed.
We serve Florida Ridge as part of our core South Florida coverage, and we’re familiar with how these stucco-clad homes age. See what else we cover throughout Florida Ridge.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Flashing Repair in Florida Ridge
Chimney Flashing Repair in Florida Ridge usually starts with a homeowner pointing at a water stain on the ceiling and wondering how it got there. The flashing is the metal seal where the chimney chase meets the roof shingles, and it’s the first thing storm wind pushes loose. When it fails, water tracks down the chase and pools above the ceiling drywall, which is why the stain often appears a few feet from the chimney itself. A typical flashing repair here runs $250 – $600, depending on whether the existing metal can be reset and resealed or needs replacement. The written estimate sets the final price, and we’ll show you the failed detail before we touch it.
Why Wind Off the Treasure Coast Opens Seams
Driving coastal wind forces rain sideways into joints that a gentle shower would never reach. The fasteners on a fascia-mounted flashing detail can work loose after repeated storm seasons, and once the metal lifts even a fraction, the seal is gone. Resetting it properly matters more than a quick bead of caulk.
Reading a Ceiling Stain
A brown ring on the ceiling below the chase is the classic sign that flashing or a cap is letting water in. The stain can spread well before the damage shows on the roof, so catching it early usually means a smaller repair.
Chimney Crown Repair in Florida Ridge
Chimney Crown Repair in Florida Ridge is mostly about stucco, not firebrick. The crown is the sloped concrete or stucco surface at the top of the chimney that sheds water away from the flue, and on the concrete block and stucco homes around here, it’s also one of the most weather-beaten parts of the structure. Sun cycling and hurricane-driven wind crack the stucco, and the hairline crack is often invisible from the ground until rain has already found its way into the attic. Typical chimney crown repair in Florida Ridge runs $350 – $900, depending on whether the crown can be resurfaced and resealed or needs to be rebuilt. The written estimate sets the final price.
The Hairline Crack You Can’t See From Below
A crown can look intact from the driveway and still be cracked. Wind-driven rain finds those cracks and follows the chase down, so what looks like a small cosmetic flaw becomes a ceiling stain two rooms over. Inspecting from the roof is the only reliable way to find it.
Resurfacing Versus Rebuilding
A sound crown with surface cracks can often be resurfaced using HeatShield products designed for that purpose. A crown that has lost its slope or separated from the flue needs a rebuild, and we’ll tell you which one your chimney needs based on what we see, not on what adds the most to an invoice.

Trusted Brands We Service in Florida Ridge
We source and install products from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, and we can work with any of them when a Florida Ridge repair needs a specific component. When your cap is storm-stripped or your crown needs resurfacing, we match the material to the job: HeatShield for flue resurfacing and crown work, Gelco and Famco for cap-and-cover components, Copperfield or DuraFlex when a liner issue turns up during inspection. We don’t stock parts locally or claim same-day parts availability, but we can typically get the right component quickly for a scheduled repair. The point is spec-grade materials that hold up to this climate, not the first substitute on the shelf.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Florida Ridge Homes
- Missing or wind-stripped caps. A cap is the first defense against subtropical rain, and once it’s gone, an uncapped flue takes water straight down. That’s how a pre-fab damper rusts shut and how a ceiling stain gets its start.
- Cracked stucco crowns on CBS homes. The sun cycling and storm wind crack the crown surface, and the damage hides from ground view. Water finds the crack long before anyone notices it from below.
- Packed pest nests in a flue that never carries fire. Because most of these chimneys are decorative, birds, squirrels, and mud daubers move in unnoticed. The first sign is often scratching in the attic after hurricane season.
- Failed flashing where the chase meets shingles. A loose metal seal lets water track down the chase and pool above the drywall. The stain shows up away from the chimney, which is why it’s easy to misread.
Pricing for Chimney Repair in Florida Ridge, FL
A typical chimney repair in Florida Ridge runs $250 – $900, and that range covers most of the storm and water damage we see here rather than the fire damage a chimney page in most cities would focus on. Flashing repair usually lands in the $250 – $600 range. Crown resurfacing or rebuild runs $350 – $900. Liner repair, when inspection turns one up, generally starts higher, and we’ll give you a range after we’ve seen the flue. What affects the price: whether the crown can be resurfaced or rebuilt, whether flashing just needs resetting or full replacement, and whether pest or water removal is needed before the repair. Every estimate is free, the price is set per job by the written estimate, and we won’t recommend work the inspection doesn’t support.
We Also Serve Cities Near Florida Ridge
We cover chimney repair beyond the Florida Ridge line, including South Beach, Vero Beach South, Lakewood Park, and Fort Pierce North. The housing stock and the storm exposure don’t change much from one of these communities to the next, so the diagnosis is the same. If your chimney is on the other side of the county line, we can still help. Our full chimney repair service covers the whole Treasure Coast.
Serving Florida Ridge, FL – Our Local Coverage Area
We serve Florida Ridge and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Florida Ridge
It probably is. A brown ring on the ceiling below the chase is most often flashing or a missing cap letting storm water in, and it can track down from the roof rather than straight above the stain. The only way to know for sure is a camera inspection of the chase, cap, and flashing. Call (844) 990-3838 for an exact quote. Estimates are free.
Yes. A decorative chase that’s never carried fire still fails: caps get stripped, stucco crowns crack, and pest nests pack the flue. Inspection checks those three things first, before anything fire-related. Call (844) 990-3838 for an exact quote. Estimates are free.
Likely a bird or squirrel nest packed into the chase, sometimes a wasp colony. A blocked, damp flue and pest activity often show up together, because a missing cap lets both the animals and the rain in. An inspection and a clear-out handle both. Call (844) 990-3838 for an exact quote. Estimates are free.
Sometimes, but only if the crown still slopes and holds together. A surface crack can be resurfaced with HeatShield products, while a crown that has separated or lost its slope needs a rebuild. The inspection decides which, and the price reflects which job it is. Call (844) 990-3838 for an exact quote. Estimates are free.
The damper rusts, and it can seize shut when an uncapped flue collects water. Year-round warmth and humidity speed that along, and a rusted damper may need replacement rather than freeing. We check it during inspection and tell you what it needs. Call (844) 990-3838 for an exact quote. Estimates are free.
If you’re in Florida Ridge and water or pests have found your chimney, don’t guess about what’s underneath. Call Unity Chimney Sweep at (844) 990-3838 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We inspect first, show you what we find, and recommend only the repair your chimney actually needs.
Written by the team at Unity Chimney Sweep.